BRAWO® Magnavity – Light Curing the Smart Way

Kaiserslautern, May 2020

Experience fast, reliable and above all smart light curing with BRAWO® Magnavity. Guaranteed with the usual installation safety and high quality from BRAWO® Tech.

The new light curing system consists of an intelligent LED head with 96 high-performance UV LEDs, a 50-metre long combination hose with integrated power and compressed air supply, a retraction unit and a control box

You save time and effort

The innovative and unique LED head allows simultaneous retraction with inversion of the liner. Curing is thus carried out immediately after installation of the liner, without the need for additional insertion of the eel.

As a result, only one access point is needed for the rehabilitation of a 50-m long segment. In many cases, this is the only way to make rehabilitation possible at all, since no additional access opening (e.g. inspection opening, shaft) is necessary, which cannot be created easily or only with considerable effort in most construction measures.

Simple and flexible installation log

All the necessary data for your construction project can be recorded via an intuitive user interface. Your installation log is conveniently retrieved on your mobile device.

Mobile and flexible in use

Thanks to the modular construction, compact design and low system weight, easy transportation of the system is guaranteed even under the most difficult access conditions, e.g. on plots of land and in buildings.

Technical Data
Weight: ca. 60 kg
Dimensions (l x w x h) : 719mm x 496mm x 955mm
Connected load [kW]: 1,2 kW
Max. range (or hose length) [m]: 50m (hose length)
Retraction speed [m/min]: from 0,1 to 2,0 m/min
Head diameter: 45 mm, curing possible from DN 70 upwards (straight pipe run/slight bends)

BRAWO® Magnavity – Smart. Efficient. Strong.


  • Exchangeable LED head with integrated operating hours monitoring
  • Installation log and interface to mobile end device (USB, W-LAN)
  • Intelligent LED head with integrated magnetic coupling for electromagnetic remote unlocking
  • Reversible dual camera


  • Saves a complete operation, only one access point necessary
  • High-performance UV LEDs with extremely high efficiency
  • Low power consumption with high light output


  • Easy transportation thanks to modular, lightweight construction
  • Very good bend flexibility, 87° possible from DN 100
  • Very fast curing

Order your new light curing system directly under Tel.: +49 631 20561-100 or If you have any further questions, we are at your disposal.

© Copyright 2021      Disclaimer | Privacy Policy | Terms and conditions | Contact | Downloads