BRAWO® Magnavity – Light Curing the Smart Way

Kaiserslautern, April 2021

Experience fast, reliable and above all smart light curing with BRAWO® Magnavity. Guaranteed with the usual installation safety and high quality from BRAWO® Tech.

The new light curing system consists of an intelligent LED head with 96 high-performance UV LEDs, a 50-metre long combination hose with integrated power and compressed air supply, a retraction unit and a control box.

You save time and effort

The innovative and unique LED heads allow simultaneous retraction with inversion of the liner. Curing is thus carried out immediately after installation of the liner, without the need for additional insertion of the eel.

As a result, only one access point is needed for the rehabilitation of a 50-m long segment. In many cases, this is the only way to make rehabilitation possible at all, since no additional access opening (e.g. inspection opening, shaft) is necessary, which cannot be created easily or only with considerable effort in most construction measures.

LED-head Mega

The powerful one!

Thanks to the 192 high-power UV LEDs and the associated greater light output, up to approx. 70% faster curing is possible compared to the Nano LED head.

The Mega LED head is suitable for rehabilitating the dimension ranges DN 125 to DN 300. From a pipe diameter of DN 150 upwards, pipes with bends can also be rehabilitated economically and efficiently.

LED-head Nano

Able to negotiate extreme bends – The flexible one!

Even in the smallest pipe dimensions, the Nano LED head scores highly with its extremely good bend flexibility. Due to its slim design and optimised guide elements, it can also be guided safely through several bends in small nominal widths.

It is suitable for use in pipe diameters from DN 70 to DN 250.

LED Kopf Nano


Simple and flexible installation log

All the necessary data for your construction project can be recorded via an intuitive user interface. Your installation log is conveniently retrieved on your mobile device.

Mobile and flexible in use

Thanks to the modular construction, compact design and low system weight, easy tranportation of the system is guaranteed even under the most difficult access conditions, e.g. on plots of land and in buildings.

BRAWO® Magnavity stands for maximum flexibility and is perfectly matched to the installation of the BRAWOLINER® product line.

Technische Daten Mega
High-performance UV LEDs: 192
Head diameter: 80 mm
Weight (head): 1000 g
Magnet holding power: approx. 100 kg
Wattage: 500 W
Light output: approx. 255 W
Wavelength: approx. 395 nm
Sensors: 2x temperature
Memory: 1x EEPROM
Curing: possible from DN 125 upwards (straight pipe run/slight bends)
Technische Daten Nano
High-performance UV LEDs: 96
Head diameter: 45 mm
Weight (head): 220 g
Magnet holding power: approx. 30 kg
Wattage: 250 W
Light output: approx. 127 W
Wavelength: approx. 395 nm
Sensors: 2x temperature
Memory: 1x EEPROM
Curing: possible from DN 70 upwards (straight pipe run/slight bends)
87° from DN 100 possible

BRAWO® Magnavity – Smart. Efficient. Strong.


  • Exchangeable LED heads with integrated operating hours monitoring
  • Installation log and interface to mobile end device (USB, W-LAN)
  • Reversible dual camera n Intelligent LED heads with integrated magnetic coupling for electromagnetic remote unlocking
  • Plug & Play: Automatic recognition of the LED head used


  • Low power consumption with high light output
  • 96 / 192 high-performance UV LEDs with extremely high efficiency
  • Saves a complete operation, only one access point necessary
  • “Turtle” function for safe curing in the inlet area


  • Very fast curing
  • Very good bend flexibility, 87° possible from DN 100
  • Easy transportation thanks to modular, lightweight construction

Order your new light curing system directly under Tel.: +49 631 20561-100 or If you have any further questions, we are at your disposal.

© Copyright 2022      Disclaimer | Privacy Policy | Cookies | Terms and conditions | Contact | Downloads