BRAWOLINER® 3D DN 200 – 300
NOW also possible to rehabilitate dimensional changes from DN 200 to DN 300!
The product family of 3D liners is complemented by the BRAWOLINER® 3D DN 200 – 300, thus making it complete now. This means that all nominal diameters from DN 50 to DN 400 can be served, even when there are dimensional changes in the pipe run.
The BRAWOLINER 3D DN 200 – 300 is compatible with the BRAWO® I, BRAWO® III and BRAWO® LR resin systems. Curing can be carried out as usual with steam, hot water, light or ambient temperature.
In addition, BRAWOLINER® 3D DN 200 – 300 fulfils the requirements of material characteristic group 2 (EP resin, DWA data sheet M_144-3) and is therefore suitable for the rehabilitation of pipes with old pipe condition II.
The new BRAWOLINER® will be available from BRAWO® SYSTEMS from May 2021 in the familiar unit lengths of 25m, 50m and 100m.
BRAWOLINER® 3D – A liner for all applications in property and building drainage systems
The BRAWOLINER® 3D was specially developed for large dimensional changes or several jumps in dimension in succession. In nominal widths from DN 70 to DN 400, the seamlessly knitted liner adapts optimally to any pipe diameter and impresses with an excellent installation result.
The unique, extremely flexible polyester loop construction allows for enormous lateral expansion. This makes the BRAWOLINER® 3D an optimal rehabilitation solution for difficult sewer systems.
The BRAWOLINER® 3D was also able to demonstrate these unique properties in various special profiles. Due to the enormous lateral expansion, the liner fits perfectly and crease-free to the side and pipe bottom of an egg profile. Here, too, multiple dimensional changes and bends of up to 90 degrees are no problem.