Curing of BRAWO® resins

BRAWO® epoxy resins can cure at ambient temperature. The addition of heat can significantly reduce the curing
time. This can be implemented in the form of hot water or steam. BRAWO® SYSTEMS offers reliable heating units, both for
curing acceleration using water or steam, that rapidly pay for themselves.


Steam Curing

In addition to curing resin-impregnated liners for domestic sewer rehabilitation with hot water, steam curing has also established itself. This is particularly the case for the renovation of downpipes, where water curing is only possible in shorter pipe sections with approx. 4 metres height difference. Steam curing has significant advantages in this case.

BRAWO® SteamGenerator 50 UL

Steam Curing

The new BRAWO® SteamGenerator 50 UL is particularly distinguished by its low weight and mobility – a flexible use at the working site is easily possible.

Advantages of the BRAWO® SteamGenerator 50 UL

  • Diesel-fired flow-type heater
  • Mobile heating device
  • Temperature up to 120°C
  • Low warm-up time of 2-3 minutes
  • Optionally available water softener and replacement cartridges
Technical Data
Steam capacity: ca. 50 kg/h
Steam power: 2900 W
Steam pressure: 9 bar
Steam temperature: ca. 120 °C
Weight: 87 kg
Dimensions (L x W x H mm): 1110 x 720 x 900
BRAWO® SteamGenerator 50 UL

Accesoires BRAWO® Steam Curing

Steam Connection Adapter

  • Enables the use in combination with the inversion drum

BRAWO® Steam Sleeve

  • Prevents condensing water from collecting in the liner and delaying curing in those areas due to a lower temperature
  • The insertable hose enables the water to be transported away

Steam Hose Extension (20 m)

  • Including double nipple for connection with steam hoses from basic set

Steam Hose Set (20 m)

  • 2 x 5 m, 1 x 10 m hoses and couplings for connection of all necessary equipment components


© Copyright 2022      Disclaimer | Privacy Policy | Cookies | Terms and conditions | Contact | Downloads