Curing of BRAWO® resins

BRAWO® epoxy resins can cure at ambient temperature. The addition of heat can significantly reduce the curing
time. This can be implemented in the form of hot water or steam. BRAWO® SYSTEMS offers reliable heating units, both for
curing acceleration using water or steam, that rapidly pay for themselves.


Hot Water Curing

Curing with Hot Water

BRAWO® HotBox HQ

The BRAWO® HotBox HQ is a diesel-powered continuous heater specially designed for domestic sewer renovation. Thanks to the high heating output, up to 3000 litres of water can be heated per hour. The mobile unit can be easily transported and can be operated
outdoors close to the rehabilitation site.

Advantages of the BRAWO® HotBox HQ

  • Oil or diesel-fired flow-type heater
  • Mobile heating device
  • Water capacity can exceed 3000 l/h
  • Temperatures of up to 80 °C
  • 2 water hoses each 10 m
Tecnical Data
Voltage: 230 V/50 Hz
Water throughput l/h (min./max.): 3000
Temperature:  up to 80 °C
Burner output: 60 kW
Dimensions (L x W x H mm):  830x 455 x 760
Weight: 85 kg
Max. operating pressure: 20 bar

Accesoires BRAWO® Hot Box HQ

BRAWO® Circulation Pump HP 1200 and Basic 840

During warm curing, the BRAWO® HotBox HQ/HotBox L is connected to the inversion drum and warm water is fed into the liner. The necessary circulation between the liner and BRAWO® HotBox HQ/HotBox L is provided by a special pump, which is designed for use with hot water.

Advantages of BRAWO® Circulation Pumps

  • Increased safety during liner installation, thanks to faster and more-uniform distribution of heat
  • High efficiency thanks to short curing time
  • More reliable installation

Hose set (water)

  • 2 x 10 m and 1 x 2 m water hoses with GEKA couplings


© Copyright 2021      Disclaimer | Privacy Policy | Terms and conditions | Contact | Downloads