BRAWO® Inversionsgeräte

The inversion process is decisive for the rehabilitation result. The liner can only conform to the pipe wall when it is inverted with a constant and uniform pressure. BRAWO® SYSTEMS offers professional high quality inversion drums. 

The best stainless steel, high quality workmanship and clever design enable an optimal result and professional operation over the long-term.

Advantages and Technical Highlights of the BRAWO® Inversion Drums

Drum axle with water connection

  • Easy filling of the liner with water without the need to open the drum
  • Output on the underside for water circulation

Pressure control on the rear of the drum

  • Enables precise regulation of the inversion and holding pressures
  • Fill height display (water level)

Hose connection fitted to the drum axle

  • Possible to invert the water hose

Solid base construction with pneumatic tires

  • For safe and simple transport

Inversion angle can be swivelled or adjusted in height

  • Optimal positioning of the inversion pipe

Large hand wheel

  • For regulating the inversion speed
  • Can be fixed in place

BRAWO® Inversion Drum Mini DN 600

This drum offers a large capacity at a low weight and combines the advantages of the proven BRAWO® Inversion Drums with the highest possible mobility.

Capacity of the BRAWO® Inversion Drums
 Mini DN 600With water hose, ¾With water hose and calibration hose
Drum volume47,1 L  
Weightca. 46 kg  
L x W x H (cm)90 x 50 x 90  
DN 5088 m45 m–
DN 7045 m38 m32 m
DN 10033 m28 m23 m
DN 12529 m24 m20 m
DN 15025 m22 m18 m
DN 20018 m15 m12 m
DN 300–––

Accesoires BRAWO® Inversion Drums – Flexible and Robust

Inversion Pipes

  • Straight and bent
  • Storz coupling 205, F150, A110 and
    Camlock 4“& 6“
  • Pipe diameter (mm) 50, 70, 100/120, 150, 200, 300

Inversion hoses

  • for flexible extension of the inversion pipes
  • Storz coupling 205, F150, A110 
    and Camlock 6“
  • Lengths 1 m, 2 m, 3 m, 5 m; special lengths available on request

Retaining strap

  • Sturdy flat cord for control and secure regulation of the inversion speed

Blind coupling F150 (water)

  • If several liners need closing off, the use of a blind coupling is recommended. This makes it possible to separate the pressure drum after inversion from the inversion bend and maintain the liner under pressure until it has completed curing
  • 2 connections for air/water
← BRAWO® Inversion Drum DN 700 UL
BRAWO® inversion drum DN 400 →